Log in

View Full Version : Craftsman gt 3000 problems


doitz
Jul 19, 2012, 10:33 AM
Mower deck runs for 5 or 10 minutes then just quits. Engine runs fine but the mower blades stop running. Let it sit for 20 minutes and the mower works for another 5-10 minutes then quits. All the while the engine runs great. Any thoughts please& thanks!

crigby
Jul 20, 2012, 07:21 PM
Check the airgap on the electric PTO clutch. There should be three oval windows in the upper housing through which you can insert a feeler gauge. Try for 0.010" to 0.012"( the same all the way around.)
Peace,
Clarke

doitz
Jul 23, 2012, 05:26 AM
Check the airgap on the electric PTO clutch. There sould be three oval windows in the upper housing through which you can insert a feeler gauge. Try for 0.010" to 0.012"( the same all the way around.)
Peace,
Clarke

Thanks Clarke! Looked at it afound the 3 windows but inserting the feeler gauge looks tricky to be able to know exact placement of the gauge? Where is the adjusting screw or bolt located pelase? Would the manual show this procedure? Many thanks,

crigby
Aug 2, 2012, 02:54 PM
Hi,
Should be three nuts near the holes(have springs on them.)
Peace,
Clarke