Replace drive disc .the chain case will move to reversr and back up it moves to netural freely but will not go to 12345 . Tap chain case with a hammer still won't go to 1 gear there are no burrs or durt on the octogon shaft . Chaincase slide freely to R and back up but not forward need help

Needs new planitary gear

needs new planitary gear

Thanks Joe. I'll try that. I don't have a parts book ,I will try the internet , if you know of a web site I'd appreceiate it thank you again van.

Hi,
There is a rod welded to the drive case that fits in a slot with a "v" at the neutral location that moves it away from the drive plate on the bottom of the engine. Something is preventing it from going into the forward speed ranges. Provide some numbers and I will either upload the parts breakdown or give you a link.
Peace,
Clarke