PDA

View Full Version : Stripped screw hole


Stuffy99
Jul 7, 2012, 10:51 PM
What size tap do I need for a 10x25mm screw

crigby
Jul 16, 2012, 08:52 AM
Hi,
You have already stated part of the answer. You need a 10mm tap; the pitch is what you also need to know. There are five different pitches possible of which only two are common. You may wish to investigate a thread replacement kit that includes appropriate drill bit, tap, insertion tool and inserts. Commonly available at most NAPA stores.
Peace,
Clarke