PDA

View Full Version : TWL736A100A0 weathertron heat pump wiring


Cowboyrick666
Jun 25, 2012, 06:05 PM
I have This Heat Pump. I am using an Alerton VLD-362 Stat. With the flowing VLD TERMINALS
24 VAC - RED WIRE TO FURNACE
GND - BLACK WIRE TO FURNACE
BO-0= FAN - GREEN WIRE
BO-1= HEAT PUMP COMPRESSOR YELLOW WIRE
BO-2= REVERSING VALVE
B0-3= HEATING STAGE 1 WHITE WIRE
BO-4= HEATING STAGE 2 ORANGE WIRE
BO-5= NOT USED
AO-0= ECONOMIZER
A0-1= NOT USED
AI-1= OUTDOOR AIR TEMPERATURE (OPTIONAL)
AI-2= SUPPLY AIR TEMPERATURE (REQUIRED) BLUE AND BROWN

I HAVE AN ELECTRIC FURNACE.
CAN YOU GIVE ME ANY HELP WIRING THESE TWO UNITS ?

THANK YOU, RICK COFFEY

mygirlsdad77
Jun 25, 2012, 07:35 PM
Sorry Rick, I personally can't help you out with this one. We just don't see heat pumps in my area. You really almost need an actuall heat pump tech that is familiar with your equiptment to get any good results. Your next best bet would be to contact tech support for your specific equiptment and controls. Good luck and please do let us know how things work out.