I am trying to wire a Hunter ON/OFF Fan & Light Control Model 27157 to a Hampton Bay Glendale 52" ceiling fan. The problum is there are only 3 wires from the fan, Blue for the light, White is neutral, Black is for fan motor. The remote has 5 wires, the black is the hot, two white wires one for neutal and one for common, red wire for the fan, and the black and white wire for the light. I hooked up the red and black to the black hot, the two whites to whites, and the black and white to the blue. The remote dos'nt work.

Connect constant power to black, one white to neutral, other white to white from fan,red to black from fan, black/white to blue from fan.