View Full Version : Kitchenaid dishwasher blinking lights
seaequus
Jun 8, 2012, 05:38 AM
My dishwasher model KUD FBHLBT6 has "normal" and "rinse cycle" blinking lights. How do I reset?
mikeyedi
Jun 8, 2012, 07:31 PM
Try the circuit breaker. Shut it off wait a few minutes and turn it back on.
mikeyedi
Jun 8, 2012, 07:38 PM
1) Crack the door open.
2) Within 3 seconds press the following sequence - Hi Temp Scrub, Energy Saver Dry, Hi Temp Scrub, Energy Saver Dry
3) Close and latch the door
4) Press the cancel button (the circle with the triangle in it)
mikeyedi
Jun 8, 2012, 07:41 PM
Here's another 2 try HEATED DRY---NORMAL---HEATED DRY---NORMAL and then allow the dishwasher to run for a minute or so and then press Cancel/Drain and wait for the dishwasher to stop draining and reset.
mikeyedi
Jun 8, 2012, 07:42 PM
Or this Normal > HeatDry > Normal > HeatDry (all lights light up)
Close door. Slide an implement into the gap at the top and press the Cancel button twice.
tomfu
Jul 5, 2013, 01:15 PM
If you just want to make the dishwasher run, then close the door and THEN press the start button. This makes my dishwasher run.
Good luck.