I just changed the filter in my furnace, how do I reset my thermostat to make the word "filter" stop blinking. I called the service dept. and they told me to find my users manual! I can't find it. HELP!

From the sticky in E&L Default - Honeywell Environmental And Combustion Controls (http://www.customer.honeywell.com) Love Honeywell tech service. Put your model number in the searchbox.

I have the same problem, but couldn't seem to find the solution in the owner's manual... did I miss it somewhere? Thanks in advance for your help.

I just changed the filter in my furnace, how do I reset my thermostat to make the word "filter" stop blinking. I called the service dept. and they told me to find my users manual!! I can't find it. HELP! Filter Help

I just changed the filter in my furnace, how do I reset my thermostat to make the word "filter" stop blinking. I called the service dept. and they told me to find my users manual!! I can't find it. HELP!

Did you find the answer?

Filter Help
Did you get the answer? I have the same problem...

How do you reset the chronotherm I've plus so that the "filter" stops blinking

Ok this is how to reset your filter days.

1. press the 'i' button to see how much days are left (which should be 0 days)

2. press the ▲ button which is next to 'wake' button.

3. press the 'run program' button.

4. you are all set. Good to go. (mine increased to 60 days but yours could be different)

e-mail me if there's a question or a problem @ [email protected]

OK THIS IS HOW TO RESET YOUR FILTER DAYS.

1. PRESS THE 'i' BUTTON TO SEE HOW MUCH DAYS ARE LEFT (WHICH SHOULD BE 0 DAYS)

2. PRESS THE ▲ BUTTON WHICH IS NEXT TO 'WAKE' BUTTON.

3. PRESS THE 'RUN PROGRAM' BUTTON.

4. YOU ARE ALL SET. GOOD TO GO. (MINE INCREASED TO 60 DAYS BUT YOURS COULD BE DIFFERENT)

E-MAIL ME IF THERE'S A QUESTION OR A PROBLEM @ [email protected]

I tried the steps you suggested, but I still have the flashing 'Filter ReplBatt'. What else can I do?

Worked exactly as described. Reset to 90 days.

Worked as advertised for me. Reset to 90 days.

Make sure that you are hitting the right
up arrow
key and not the one the controls the temperature setting. That was the mistake I made at first.

Press and hold the I button until the timer is displayed. Then you are prompted to set the new amount of time for the timer to expire. The days are in cumulative days of the actual fan system running. 30 days is the default.

Thank you so much for answering that question it's been bothering me for 2 months