PDA

View Full Version : Honda Harmony Lawn Mower


puzzled51
Apr 17, 2012, 04:17 PM
Hi! New to site so forgive if not done right. Just bought a very used Honda 2013 Lawn Mower and found the ignition switch has been removed. On line the switch shows it to have 5 terminals but my mower has one plug with the matching 5 slots plus an additional one hanging beside it. Question to someone, is that separate one hooked to anything and if so where or is the switch suppose to have 6 terminals? Thanks!

crigby
Apr 17, 2012, 05:56 PM
Hi,
Yes, it is correct to have a separate wire as well as a plug going to the switch. If you would, look inside the hood on one side of the steering column cover for the serial number. I found a possible part# 35100-772-003 that goes to one machine, but there are 6 or 7 versions with serial number breaks. Below is a picture of the harness.
Peace,
Clarke