CGJamma
Feb 26, 2012, 02:50 PM
How do you remove the center portion of the flange after you have mounted onto the floor
massplumber2008
Feb 26, 2012, 02:56 PM
Hi CGJamma
Are you asking how to remove the "knock out" plug in the center of the flange?
If so, you hit the raised ridge with a hammer and that starts to break the seal. Continue hitting the raised ridge until the cap is slightly loosened and then use a pair of pliers to wiggle the plug back and forth to remove it, OK?
You could also use a dremel tool with circular saw blade and cut it out if the hammer method worries you.
Back to you...
Mark
ma0641
Feb 26, 2012, 05:41 PM
Had me wondering how you flushed through a 3/4" flange!! 3 or 4" flange. Mark gave you good directions, I'd do the same.