I'm planning on re-tiling our shower. I'll be using 4X4 tiles on the shower floor. My question is, what do you use to cut the tile around the drain, hole-saw? Thank you. Tim

Hole saw or carefully used nippers. Use your tile saw to cut the largest end and then use nippers.

A special hole saw made for ceramic Vacuum Brazed Diamond Core Bit for glass, ceramic and porcelain 2" (http://www.toolocity.com/brazed-core-bits-2.aspx)

Tell us more about these 4x4 tiles. Are they porcelain tiles or basic ceramic 4 1/4 x 4 1/4" like those sometimes used on walls? Do you have names or other info?

Jaz

All of the above or use a:

Roto-zip tool with tile cutting bit

Angle grinder with a diamond blade

Dremel tool with a diamond/carbide blade

Mark