How to remove handle on Moen kitchen faucet?

Do you know which model you have? Moen has some great tutorials for this kind of thing. Installation Help / Animated Tutorials for Moen Faucet (http://www.moen.com/consumer-support/installation-help/tutorial?id=moen0101) On many Moen you first look for their little blue logo which is actually a rubber plug covering up a set screw, loosen that screw.

Hi Rbchandler

If this is a single handle faucet then there should be a button on the front of the handle (see image below).

Remove the "button" using the edge of a knife (simply pops forward) and then use the proper sized allen wrench to remove the allen wrench inside. If you use a flashlight and move the handle around a bit you will find the allen screw faster... ;)

If this is a two handle faucet I'd need the model number of the faucet to tell you more, OK?

Back to you..

Mark

Mark great minds but we don't know the difference between a plug and a button, go figure.

I didn't know what to call the darn thing... button just came to mind!

Timing was amazing, too... both posted at 10:04

Have a great night, Bob!

Hello Bob and Mark, here is a detail photo of a Moen single handle kitchen faucet it is called plug button, Thanks.
Regards
John

In addition to the expert advice given this might help. (see image) Good luck, Tom

Tom, that's the one I was thinking of. You guys have covered all the bases, hope to hear an outcome.

Plug button... that's a riot John (Afaroo)!