View Full Version : 1995 Honda Accord Stop running
horace01
Jan 20, 2012, 10:51 AM
I have a 1995 Honda Accord V-Tec 4 cylinder that runs great and stalls out.
TxGreaseMonkey
Jan 20, 2012, 11:42 AM
Replace the Ignition Control Module (ICM) and coil. Apply silicone heat transfer grease to the back of the new ICM.
horace01
Jan 20, 2012, 12:17 PM
I have also just notice when it shuts off I can hear the Main Relay clicking. And when this happens I have fire at the sparks but no fuel pressure. I checked for 12V at the fuel pump but it is zero. I am not sure if this would be a module or coil problem. If you still think so please let me know. And if you could provide an explanation of while you still feel strongly about it. Thank you again.
TxGreaseMonkey
Jan 20, 2012, 04:56 PM
Does the Check Engine Light (CEL) consistently come on for 2 seconds and then goes out, when the ignition switch is turned to ON (Position II)? If the CEL stays on, perform the K-Test on the ECM.