PDA

View Full Version : Converting remote control ceiling fan to normal operation


URC
Feb 14, 2007, 07:35 AM
How can I convert my remote control combo ceiling fan and light to work normal off a light switch? I know I would need some kit to replace the remote receiver in the fan, so that I could manually switch speeds and direction and turn on light. Is there such a kit?
The fan is made by Smartel, Inc. Model CR552 CA and the remote is a R520T. Ant help would be appreciated. I inherited the fan from my son and it is beautiful, but would to use it manual.

ceilingfanrepair
Feb 14, 2007, 08:05 AM
Does the fan have pullchains? If not, it is unlikely you can easily wire it to operate without the remote.

URC
Feb 14, 2007, 08:14 AM
No pull chains, and no forward-reverse switch.

ceilingfanrepair
Feb 14, 2007, 12:04 PM
It can still be done, but it's one of those "if you have to ask, it's too complicated" projects. The reverse switch is easiest, just a DPDT relay, but the speed selection usually comes from capacitors, and the motor rub capacitor is usually also part of the receiver.