I have a toro snowblower I don't know what year it is sometime in the 90s and it won't start due to gummy gas so I need to take the carb off and clean it I never done this before and I was wondering how to take it off and where its located I appreciate it ?





Thanks

Follow th fuel line to the carburetor, or sometimes the carb will be mounted on the fuel tank. This can be a somewhat difficult job for the beginer I would look into a local service center. If you choose to continue post the engine make and model.
Don

Follow th fuel line to the carburetor, or sometimes the carb will be mounted on the fuel tank. This can be a somewhat difficult job for the beginer I would look into a local service center. If you choose to continue post the engine make and model.
Don



My snowblower is a toro 724 with a 4 cycle engine