Log in

View Full Version : Design atenna


MIKEHO
Nov 12, 2004, 10:14 AM
1.Design a pyramidal horn antenna at 5775 MHz to offer a gain of 20 dB. You may assume any appropriate value for the wave guide dimensions.

2.For a gigabit wireless backhaul link ( LOS ), the data rate is 2Gbps. The frequency of operation is 11GHz. Suggest an appropriate antenna and substantiate your choice based on a comparison with other possible antenna structures.

3.Design a matching section ( patch / transmission line ) to match a 50 ohm source to 75 ohm load . You may use any of the freeware available on-line such as “AppCad” or “SMITH ” to do the matching.

fredg
Nov 13, 2004, 08:05 AM
Hi,
This sounds like a homework question...
Best of luck,
fredg

Press2Esc
Nov 21, 2005, 01:29 PM
Ok... and don't forget

4. No cheating or using campbell chunky soup cans..

P2E


1.Design a pyramidal horn antenna at 5775 MHz to offer a gain of 20 dB. You may assume any appropriate value for the wave guide dimensions.

2.For a gigabit wireless backhaul link ( LOS ), the data rate is 2Gbps. The frequency of operation is 11GHz. Suggest an appropriate antenna and substantiate your choice based on a comparison with other possible antenna structures.

3.Design a matching section ( patch / transmission line ) to match a 50 ohm source to 75 ohm load . You may use any of the freeware available on-line such as “AppCad” or “SMITH ” to do the matching.