I can pore gas into the throttle and it will crank , but I don't hear clicking , like someone suggested I should hear at the throttle , so does anyone have a clue what I can do to fix this problem , cause it will not run , without poring gas into it by hand.

Replace the Ignition Control Module (ICM). Easy job.

Well I changed the icm , but its still not working and it cost me 50 dollars , so I still need some help

I can pore gas into the throttle and it will crank , but I don't hear clicking , like someone suggested I should hear at the throttle , so does anyone have a clue what I can do to fix this problem , cause it will not run , without poring gas into it by hand. I have changed the ignition control module , and its not the problem.

Based on your "quick to judge" response, no more help from me. Take it to GM.