scottmayday
Dec 7, 2011, 07:57 AM
I installed myself and had to replace the cold water shut off valve already. I have flushed both the hot and cold supplies already by removing one and turning the water on. Pressure on both sides are good and more importantly equally. The sprayer that's on a separate line from the valve assembly and appears to have full pressure. The spout to valve assembly appears to be the line that has very low water pressure. I flushed that line out and had it removed completely for inspection and remain confident that its clear of debris. What now? Is there a regulator or something else inside the valve assembly that might be causing this problem or might I have a bad faucet. LDR is the manufacturer.
Model # 950 11329 Exquisite Kitchen Faucet I purchased at HOBO this past month. Thanks for your help and opinion / recommendations. Scott May. [email protected]
Model # 950 11329 Exquisite Kitchen Faucet I purchased at HOBO this past month. Thanks for your help and opinion / recommendations. Scott May. [email protected]