View Full Version : 94 Ranger 2.3 Won't start
bigewhat
Nov 19, 2011, 06:16 PM
My 94 2.3 will not start. Coils changed,plugs changed... no check engine light on. Been running rough here and there, sometimes worse than others. Sometimes I would have to hold the key till it started so I just changed the crank position sensor and it cranks better but will not start
TxGreaseMonkey
Nov 19, 2011, 08:52 PM
Victory is close. Replace the Ignition Control Module (ICM). I recommend replacing them every 120,000 miles or 10 years, whichever comes first. They are problematic components. If the problem persists, change the Camshaft Position Sensor.
bigewhat
Nov 20, 2011, 09:58 AM
This model doesn't have the camshaft sensor, its not a California model
TxGreaseMonkey
Nov 20, 2011, 01:00 PM
The problem is likely with the ICM, anyhow. I work off the information provided--sometimes, it's not the best to begin with.