PDA

View Full Version : 3 way light/fan control


iamkado
Nov 5, 2011, 01:57 PM
I want to control a fan/light from 2 locations (3way) but I want it to fit into 1 switch per location? I haven't found any 3 way combined switches so here is my idea. I have 2 hampton bay remotes (191-707). Normally the power supply goes to the remote's 1st black wire and then the remote's second black wire feeds the power up to the fan. If each remote is supplied does it matter if there are two lines feeding to the fan assuming that the wires feeding the fan are joined togeather at the fan itself?