cherr
Oct 24, 2011, 06:59 AM
Had ignitor and heat seņor replaced. My furnace is about 16 yrs. Old... It starts up normal
Sometime stays on full cycle. Other times starts fires up and then flame goes out and cycle
Tries again about 3 time. I then shut down the themastat. Had thermostate checked out also
All by licensed heating a cooling dudes. One said could be ciruit board. Not sure if we replace and not the problem then we will check blower motor. Other company said blower motor fine. Does not act up when heating and cooling company comes out. Seems to act up after furnace runs awhile. What could be the problem before I get ridpped for a circuit board that I might not need. Any suggestions.
Sometime stays on full cycle. Other times starts fires up and then flame goes out and cycle
Tries again about 3 time. I then shut down the themastat. Had thermostate checked out also
All by licensed heating a cooling dudes. One said could be ciruit board. Not sure if we replace and not the problem then we will check blower motor. Other company said blower motor fine. Does not act up when heating and cooling company comes out. Seems to act up after furnace runs awhile. What could be the problem before I get ridpped for a circuit board that I might not need. Any suggestions.