So my computer specs are:

ASUS m2n mx SE plus Motherboard
AMD Athlon x64 dual-core Processor
1 2GB kingston ram card
1 NVIDIA Geforce 8500 GT 1GB
1 SEAGATE 160 GB Hard drive

Yesterday, I was playing online game's when my computer started to freeze.
Pixel's started darting out and changing color's and my PC was a open cased.
So I decided to move my videocard and the screen changed went blank and lighted up. The screen was messed up. So I resorted to restart my computer. Via hard reset.

I pushed the power on but it won't work anymore. It just won't work but it light's are blinking but no beep's and no BIOS screen. So I started with the basic's, disassembling everything and trying it one by one. But to no avail. Nothing come's up.

The computer just blinks. This may be caused when I moved the jumper of the CLEAR RTC to normal which the clear rtc clear's the settings and normal returns it back.
When I move the jumper (the blue thing that you move to two or 3 pins) I move to clear rtc it just normal the power led stays and the red blinks once or two. But when I move it to normal the light blinks in a patern "blue,red,red" and repeat's.

So now I'm here asking for help.
Is the problem my hard drive?
Please answer back. I need help.

Have you tried removing the CPU and then reinstalling it? Were you running OC (over clocked)at the time?

It sounds like your CPU is messed up at this time.

My computer was not overclocked. Sadly.
Beside's my computer cannot be overclocked as it crashes my computer for some reason.

It blinks like blue red red while the jumper is on pins 1-2. while it you can't turn it on in 2-3 in the CLR RTC area.

You might find this interesting:

M2N-MX SE PLUS Memory Problems - Memory - Motherboards-Memory (http://www.tomshardware.com/forum/247818-30-memory-problems)


http://search.yahoo.com/r/_ylt=A0oG7kZyyYROgz0AnNVXNyoA;_ylu=X3oDMTByMTNuNTZ zBHNlYwNzcgRwb3MDMgRjb2xvA2FjMgR2dGlkAw--/SIG=12g6gkhr3/EXP=1317353970/**http%3a//static.compusa.com/pdf/Asus_M2N-MX_SE_Plus_Manual.pdf

I have the same manual from the pdf file.
Readed everything, but it doesn't concern about the why my front panel ligts are blinking in that pattern.

How can I know what's wrong with that?

Maybe it's the ram? But we just tested it some few days ago and its in a good state.
To behonest though, this happened before but without the pattern lights.
Its just like the hdd won't read or something because it only blinks once. The red hdd light that is.

Anymore help would be thankfully helpful.

Will it post at all?

NVM, Good sir!
I fixed it!


If your asking by the way. I ticked the holder of ram(the thing that holds the ram into place) while the power was on.

There was a cmos checksum error because I removed the battery. (it was the after computer worked.)

Thanks For The Help!

Thanks For The Help!

No problem. Glad you found the answer. Thanks for using AMHD.