PDA

View Full Version : Are the fuse wires put back on a whirlpool GEW9200LW0 dryer correctly?


bestofcherie
Sep 11, 2011, 12:50 PM
We put a new thermostat fuse and fuse box in our dryer because it was not heating. Now it does not start. Did he put the wires in wrong or what. What do we need to do? What wires go where?

parttime
Sep 11, 2011, 04:03 PM
Hi bestof, do you mean you changed the thermal fuse? What is the fuse box? The thermal fuse just has two wires, how many wires were on what you changed?

drtom4444
Sep 12, 2011, 10:07 AM
I am confused also. The thermal fuse has only two wires and it's just a connection between two wires and does not matter about the order. What else did you replace? DrTom4444

bray1land
May 22, 2012, 02:36 PM
I replaced the rear bearing in a frigidaire dryer but don't remember how the wires go back

drtom4444
May 26, 2012, 01:04 PM
These should show you how to do it: http://dl.dropbox.com/u/8010163/Frigidaire%20Affinity%20Dryer%20Service%20Manual.p df
http://dl.dropbox.com/u/8010163/Frigidaire_27in_Washer_and_%20Dryer_Gas%20and%20El ectric.pdf
You would have to remove the wires on the door switch, but I don't know what else. Just plug the wires on door switch where the closed connection when not depressed goes to light and the other coming from power is common then the one left goes to other terminal.