I have a 1993 Honda Accord and it had and oil leak. I found out that the oil leak was coming from the Gasket Valve, so we replaced the Distributer. I was driving one morning and it just stopped giving my gas and it just died out and the check engine and oil light came on. Next this is that we replaced the ignition coil and it still won't start. I'm at a lost. Can someone please help me!

. Check for codes by jumping the Service Check Connector.

. Assuming you installed a genuine Honda distributor (all others are suspect), the Ignition Control Module (ICM) may have failed. It's located inside the distributor. Be sure to apply silicone heat transfer grease to the back of the ICM, if you decide to replace it. Depending on how old the new distributor is, consider exchanging it for another. Again, it's best to go genuine Honda for distributor housings.