skohon
Jul 3, 2011, 03:48 PM
I need to replace the nut to hold the condenser fan on and cannot find the right size. Thanks.
ma0641
Jul 3, 2011, 04:44 PM
It could be metric or SAE. Most are 6/32, 8/32 or maybe 8/24. HD and Lowe's have screw samples in their hdwe section. Isn't it more than 1 nut? Take the other ut with you and try the samples.
drtom4444
Jul 4, 2011, 03:17 AM
Are you talking about the nut that holds the blade on? If so I would take it to the hardware store and find a nut and washer. The original one is a stamped nut. DrTom4444