PDA

View Full Version : The starter in my 1994 Jeep will not work after hot.


Mopar94
Jun 24, 2011, 04:12 PM
I have a 1994 Jeep Grand Cherokee. I have replaced the starter cause after I drive for about 15min and shut it off it won't crank. All I get is a clicking noise. If I let it sit for 30 or 40mins, it starts up fine. What could be causing my Jeep to do this? I have also changed the starter relay,auto shut down relay,ignition relay and switch.

TxGreaseMonkey
Jun 24, 2011, 04:51 PM
. Remove and fully charge the battery.

. Clean battery terminals and cable connections (both ends). Clean the bolts and surface area where the starter motor fastens to the engine.

Mopar94
Jun 25, 2011, 09:22 PM
My fiancée cleaned where the starter bolts to engine. He also cleaned the connecter that goes on to the starter. I will cleaned the cables that go to the battery. I have had people tell me the nuteral safety switch could be doing to. But I will do what you suggested. Thank you for answering my question.