I have a 94 ford escort and my clutch needs bled I can't find the spot to bleed it

The bleeder bolt will be on the slave unit. Check it out at RockAuto.com--it's right there. Simple. These links may help:

https://www.askmehelpdesk.com/cars-trucks/faq-how-troubleshoot-repair-maintain-hondas-selected-other-vehicles-46563-2.html#post232186

https://www.askmehelpdesk.com/cars-trucks/faq-how-troubleshoot-repair-maintain-hondas-selected-other-vehicles-46563-5.html#post619000

https://www.askmehelpdesk.com/cars-trucks/faq-how-troubleshoot-repair-maintain-hondas-selected-other-vehicles-46563-9.html#post1833643

Thanks I will try it tomorrow

Be sure to get a one-man bleeder. It doesn't take much to get air in the system--then, the pedal will go to the floor. Most bleeder screws on clutch slave units are 8 mm. Use a box-end wrench or deep socket to break it open.

OK I have bled brakes before is it any thing like bleeding brakes

Where is the slave unit located under the hood or inside the cab