I'm a silly women on my own as I'm a widow I got a new washer today and they say I need a jubilee clip to put round the waste pipe there are all these different sizes on the tool website can anybody tell me please which one I can't use it till I get one thanks so much

A jubilee clip in reality is a stainless steel clamp. If your washer hose is going into a flexible hose you would need to clamp them together. If your washer hose is "U" shaped at the discharge end and is going into a ridge pipe, you probably don't need to clamp them together.

Sorry I don't understand I do need a jubilee clip as the drain pipe needs to fit into the pipe under the sink as its too loose and water is leaking I need to know the size of the jubilee as there are several I've measured round the pipe and its 3 1/2 inches so do I get an 80mm to 90mm one thanks

3 1/2inches = 88.90 mm

You need a 90 mm clip. DrTom4444

Thank you very much for your help they do them 8omm-100mm so I've ordered one of those also I've ordered a little tool called a jubilee clip driver so I should be able to manage love hippy sherree

Thanks very much for your help they do tham in sizes 80mm-100mm so as that's in the middle it should fit

I'm glad we were able to help you out.