Hi,
I have a 6 foot by 6 foot corner jecoozi tub in my bathroom.I have kohler electronic controls... the problem is when I am filling the tub the temp of the water drops after a few minutes.this in turn causes the tub electronics to shut the water to the tub...
OK than,my heating system is gas and new (97 percent eff)... I have a separate hw tank..
If my hw tank is to small,do I replace it?and if so,will that work?
Or do I need some type of separate gas hw heater only for that tub?if so,will that work and what do I need to buy?
Please help??
Thanks,
Steve e mail [email protected]

Steve. Don't post your email for all the spammers to see! Does the water surface measure 6X6 or is it 6X6 along the walls? Makes a big difference in the volume. What size it the HW heater servicing the tub? You could be low on volume or have a broken dip tube. My tub is 5X5 along the wall, serviced by a 50 Gal electric BUT, there is a heater inline with the pump. Please tell us more.

Do you have the model # for the tub?