View Full Version : My Drywall Repair Turned Into A SORE THUMB
Scotty13
Mar 6, 2011, 07:32 PM
I just recently patched up some holes in my bathrooms were the ceramic towel and toilet paper was. This is my first time doing something like this. They seemed to turn out okay, until I painted over them and now they stand out like a sore thumb. Any suggestion how I can fix this bore I take a hammer, make another hole and start over?
Thanks, Scotty
creahands
Mar 6, 2011, 07:48 PM
Can u explain how u fixed them?
If u didn't prime and paint the whole wall, the patch will show because of oxidation of old paint.
Chuck
Scotty13
Mar 6, 2011, 08:07 PM
I cut the drywall to fit and taped them down with joint tape. They seemed to start even to the wall. I was< I thought I was using the joint compound evenly.
hkstroud
Mar 6, 2011, 08:18 PM
they stand out like a sore thumb
I am assuming that that means you can see the edges or outline of the patch. That means you didn't sand well enough. When sanding drywall joint compound (mud) it is the edges you have to watch. When sanding joint compound if you can see where the mud starts or stops, chances are that it will show through the paint. The edges need to fade away so that you can't be sure where it starts or stops.
Now, you can sand away the paint to get down to the mud. You only have to sand the edges of the patch, not the whole patch. The center will take care of it self. I don't know how long it has been since you painted but you will probably have to wait a week or so to sand. The paint is dry on the surface but is probably still soft under the surface. It will only clog up the sandpaper.
Or, you can cover the edges of the patches with more joint compound, let dry and then sand smooth. Then re-paint.
Remember the edges have to sort of fade away. If you can see the edge unpainted, it will really show up when everything is the same color.
pattyg2
Mar 7, 2011, 02:42 AM
Both answers are correct! The joint compund needs to be feathered out and the patch needs to be primed. Joint compound soaks up paint so it needs to be sealed with primer.
Scotty13
Mar 7, 2011, 05:58 AM
I just painted the walls yesterday, so in a week I'll be able to sand the edges and repaint?
Scotty13
Mar 7, 2011, 07:01 PM
If I bought a ELECTRIC PALM SANDER and sanded down the bumps (walls already painted) would that help without redoing the holes over?
Stratmando
Mar 7, 2011, 07:53 PM
Matching texture can be difficult sometimes, Plaster, Drywall, Knockdown, Some can be very difficult to match.
hkstroud
Mar 7, 2011, 10:43 PM
Show us a picture of these patches. Try to make sure that the picture shows the imperfections.
Scotty13
Mar 8, 2011, 06:28 PM
I got my brothers electric palm sander and sanded down the bumps, paint included. So far, I'm glad I did it. Thanks again for everyone's help.
Scotty