PDA

View Full Version : Ford 6.0 powerstroke no crank issue


scarp19
Jan 23, 2011, 06:20 PM
Help 6.0 powerstroke no start
I have a 2004 F350 6.0 diesel currantly experiencing a no crank no start issue. If I jump out the starter the engine cranks fine.(not a starter or battery issue) When the key is turned to the on position the glow plug indicator comes on but I can't hear the fuel pump or the glow plug timer run. If the key is turned to the start position nothing happens.(no crank). Ford changed the FICM and reflashed the PCM for hard starting prob. They said they couldn't address the no crank issue besause it didn't occur while they had the truck. I also tried moving the shift selector from Park 2 neutral with no change. Of course extended warranty expired 10/10. Any suggestions would be appreciated. Thanks

TxGreaseMonkey
Jan 23, 2011, 06:32 PM
. Test all under hood and under dash fuses with a test light or multimeter:

https://www.askmehelpdesk.com/cars-trucks/faq-how-troubleshoot-repair-maintain-hondas-selected-other-vehicles-46563-3.html#post252145

. Replace the ignition switch, which you may want to check first for wear, pitting, or melting. Easy job--just be sure to disconnect the negative battery cables first. You may enjoy reading this link:

https://www.askmehelpdesk.com/cars-trucks/faq-how-troubleshoot-repair-maintain-hondas-selected-other-vehicles-46563-3.html#post235560

kaybug3
Nov 19, 2012, 11:13 AM
I have a 2005 6.0L powerstroke turbo deisel.. its stuck in a low gear an the switch will not crank it you have to jump the starter. Any suggestions?

Candian1987
Nov 19, 2012, 04:37 PM
When you jump the starter with key on does the truck start or no, does it do this when it gets hot or won't start period. Do you have battery power at starter and do you get a signal when you switch key from off to on at solenoid?