I have a Intertherm Heating/Cooling w Heat Pump: B2BV036K-B.? Years
VOLTAGE: 208/230
HZ: 60
FLA: 2.6
HP: 1/3
Heat Kit: H1HK010H-01
I am replacing an old Intertherm thermostat with a dial that had 2 mercury tube/switches with a New Honeywell RTH6350D1000:
Old thermostat Pin///Wire Color///New Thermostat Pin
R ///RED/// R/RC
E/W2 ///BLACK/// E
Y ///YELLOW/// Y
O ///ORANGE/// O/B
G ///GREEN/// G
W2/E ///WHITE/// AUX
L ///BROWN/// N/U
X ///BLUE/// N/U

New Thermostat set to Function/System type 1/5: Heat Pump-Outside compressor for heating cooling with backup or auxiliary heating.
Set Schedule. And test.
New Thermostat setting can turn on fan but no heat or cool.
Put old thermostat back now only "Emergency heat" indicator/heat comes on.
Tried new again now nothing comes on.
Left it with the new one connected for now. What am I doing wrong? Is there a reset for the Heater/Cooler?