So I installed a lexmark printer and when I send something to be printed, the printer starts, does what it should (?) which to me is printing, and then a blank page comes out. There is nothing at all on it, not even a dirty mark! When I try to print a test page it tells me it is printnig, paper feeds through, I can hear printing and then a blank page again. What is the problem. Yes, there is ink in the cartridge, because I get it on my fingers when I check the cartridge, so I need help please.
Thanks

Lexmark has a bunch of test utilities packaged with its drivers, have you tried any of these ?

Is there any paper stuck in the printer or cartridge ?

Just a blank page or a blank page after what you wanted to print. If just a blank page did you remove the tape from the cartridges?

No I can't see any paper stuck anywhere. Errm what are test utilities and where do I find them . Thanks

Lol yes I did remove the tape from the cartridge and what happens is... the printer starts up, the ink thingys move from side to side (to me they are printing) and then a blank page comes out... my printing is not done.
Thanks

Check Lexmarks site Here (http://downloads.lexmark.com).
You may have to reinstall your printer again to ensure full functonality.

I have installed it about 10 times already and I have been to the Lexmark site to find answers but there are none. Is it possible that the printer cable could be faulty?

If this is a new printer, have you changed this over to the default printer,

Yes this is the default printer.
Thanks

If a page ejects and the cartridge carrier moves, then its unlikely to be the cable. It has to be something in the ink delivery system. Make sure the cartridges are seated properly.

Is this a brand new printer? Has it ever worked? If its new, frankly I would return it (and get an HP). Lexmark has a poor cost per page rating, That's why their printers are so low cost, you pay through the nose on ink.

Try this Shut off everything disconnect the cable from the printer to the computer.
It is either a USB cable or a larger cable.

Hold down the top button and turn on the printer only.

It should do a self test.

If this does not work check manual for self-test

If it prints correctly then the problem is installation or cable

Im sorry I don't understand. What top button should I hold down. Also I tried with another USB cable and still get a blank page.
Thanks for all the help

This is a stab in the dark but are the ink cartridges the right ones for that printer model?

This is a stab in the dark but are the ink cartridges the right ones for that printer model?

As far as I can see and I have checked these are the right cartridges and are proper Lexmark ones.
Thanks

Follow these steps. They worked for me.

1. Click on Setup.
2. Go to Maintenance.
3. Choose Clean Printhead, Align Printer, then Print Test Page
4. After that try printing and it should work.
5. If not choose Check Ink Levels to see if the ink is the problem.