PDA

View Full Version : I would like to know if JB weld can repair 2 pin holes on the side of the water pump


nelson4977
Nov 26, 2010, 10:19 AM

TxGreaseMonkey
Nov 26, 2010, 11:41 AM
It probably can, if you are sure they are not weep holes. Personally, I would not do it. If pin holes have developed in the housing, imagine what the impellar may look like. You will feel much better, if you replace the pump--many come with a lifetime warranty. It sounds like the coolant has not been changed every 2 to 3 years.

ballengerb1
Nov 26, 2010, 11:45 AM
I agree, its like plumbing, if a pipe has a pin hole the entire wall of the chamber is very thin and will go when you need the car the most.

CaptainRich
Nov 27, 2010, 06:10 AM
I agree with my esteemed colleagues.
You could be treating a symptom but ultimately hiding a larger problem. Those pinholes could mean advanced corrosion from inside the cooling system.
What do the other system components look like? Any problems with them?