I have a double pole thermostat 2 red wires and 2 black wires. Coming from the wall is 2black wires join together and 2 white wires join together Could anyone tell me how to get it working?

Tipper,

This post is over a year old. I am going to ask that a new post be opened for you.

Appending to old items like this often causes a new question to be ignored.

Thank you donf looking forward to the help.

Moved.

1. you asked your question as an answer to someone else's, so no one can tell it was a new question

2. the thread you answered was over a year old

First you need a voltage tester to determine which of the black and white wires have line voltage on them, and what is that voltage, 120 or 240 volts.

Then following the instructions for the thermostat you have, connect Line and Load correctly.

i have a double pole thermostat 2 red wires and 2 black wires. Coming from the wall is 2black wires join together and 2 white wires join together Could anyone tell me how to get it working?Since the white and blacks are spliced together, and you did not tell us the voltage or what it feeds, there is no way for us to be able to tell what is what.

Do you have a voltage meter and the ability/confidence to test live wires?