amowl
Oct 25, 2010, 03:58 PM
I have a gravely that the solenoid went bad. I was jumping the terminals to start it and I have let it just sit in my shed for about a year. I bought a new solenoid and put it on. When I go to start it I have no electric on my control panel and it won't crank or click... I used jumpers to the starter and tried to start it. I have no spark and seemingly no fuel. I have checked the ''fuel pump'' and it seems OK. I have fuel all the way into the carb but that's as far as I have gone.I can spin it continuously for a minute without the spark plug in a cylinder and I have no fuel in the cylinder... I was planning on disabling the kill wire and seeing if it had spark with it disabled.I think that I might have gotten the wires wrong on the solenoid. I have 5 wires and 4 hook ups 2 of which are the load terminals and load wires.does any one have a diagram or any help?
ANY HELP APPRICIATED// THE ENGINE IS A BRIGGS - Vanguard SERIES MODEL 303777
ANY HELP APPRICIATED// THE ENGINE IS A BRIGGS - Vanguard SERIES MODEL 303777