I'm installing an alcove tub, shower is separate, the handles and spout will be wall mounted, and I was looking at using the delta line of products for the project, until I can't seem to find any two handle wall mount valves... totally a novice in plumbing... I design my husband is the handyman, but of course this is out of his league... we need a little help in the right direction, thanks much blessings,

the handles and spout will be wall mounted, and
Are we talking about the handles only being wall mounted or is it the entire valve to be visible? Are you trying for a "period" look? Back to you, tom

No not a period look at all... it is contemporary, but with classic luxury style; so the tub is an alcove and the fixtures are wall mounted and the valves not exposed only the levers and tub spout, is that helpful?

the tub is an alcove and the fixtures are wall mounted and the valves not exposed only the levers and tub spout,
Then all you want is a regular One handle tub and shower valve,
It sounded like you wanted a exposed chrome valve for a retro look.
I know I got to be missing something here. What is it? Back to you, Tom

Tom,
Well my problem is now solved as I decided to go with a kohler product. I'm sure I just wasn't explaining this properly
I want a cold and a hot handle and a tub spout, I don't care for the one handle set ups... I like the feel and look of the two handles hot and cold seperatly vs. the combined mixer style. But thanks for all the efforts
Tammy

Thanks for clearing that up. Good luck on your remodel, Tom