"The "00h" appears in the display when the DELAY button is pushed. Pushing the DELAY button again before the estimated cycle time reappears will scroll the delay time upward (01h, 02h . . .). Holding the DELAY button down will also cause the delay time to constantly scroll upward until the button is released. Pushing the DELAY button will not wake the machine up from the idle mode.

If you only get "00h" in the display occasionally and no other buttons or displays work, then the machine control board is not operating properly. If the control board experienced an electrical surge, it may be scrambled and not operating properly. Although it has only a slim chance to work, you may try disconnecting electrical power completely to the unit (unplug it or turn off the breaker). After several minutes, reapply electrical power. If the control will not respond and you only see an occasional "00h" in the display, you will need to call a service technician to diagnose and repair your washer." -unknown forum user

Rick