PDA

View Full Version : L100 John Deere won't start after removing and replacing the deck


banjosnr
Sep 27, 2010, 03:53 PM
My L100 tractor was working fine but after I removed the deck to replace a spindle and blades I believed I had replaced everything back where it belonged but when I went to start it I got no response. There is no clicking or starter turning or anything.
I checked all the wires, the fuse and everything else I could see but nothing jumped out and told me the problem. My initial thought is the seat sensor but I have no idea how to check it. I can find it, unplug it and put it back but that's it.
Any help would be appreciated.

DG
Sep 27, 2010, 07:01 PM
Check your lever that engages the pto /mower deck make sure its all the way off.

ballengerb1
Sep 27, 2010, 07:15 PM
Sure it could be the seat sensor (safety switch) but it is far more likely to be something you didn't quite get right in reassembly. Start with DGs suggestion.