I had to replace condenser fan motor with new and new motor has more wires than old one. Please tell me how should I wire it?

The old motor had only 3 terminal.
Black was connected to AC circuit board with relay
Purple was connected to dual capacitor common
Brown was connected to ducal capacitor fan terminal

The new motor has 4 terminal
Brown
Brown with white strip
Black
White

Brown is Capacitor Only
Brown with white stripe ( Is actually the same wire as the white wire) White is power black is power-Hook your Black where Black was, Brown where Brown was- Brown with white strpie on common, leave the white disconnected

Hello FLSTF,

Thanks for the help, it did worked.