View Full Version : 20018 won't start
kbird2278
Sep 11, 2010, 10:42 AM
Mt Toro 20018 won't start. I cleaned the carburator and now it doesn't even catch at all when I pull the cord.
Check make sure your getting fire to the plug.
Have you hit anything with it.
What made you think you needed to clean carb.
kbird2278
Sep 12, 2010, 02:56 PM
Previously, I cleaned the carb when it started and it didn't catch, but apparently that isn't the problem. It looks like I'm not getting fire to the plug and I tried a new spark plug and it still didn't work. Thank you for the help.
kbird2278
Sep 12, 2010, 03:05 PM
If I test coil with an ohm meter, would it be no conductivity if it's bad? Thanks.
Hard to get a true reading with an ohms meter.
If you know for sure there's no fire
Replace the coil.