PDA

View Full Version : How do I get to my lid switch on whirlpool ultimate care 2 washer do not drain


Onlyone
Aug 25, 2010, 05:56 PM
How do I remove lid switch on whirlpool ultimate care 2 washer that do not drain after wash cycle

Stratmando
Aug 25, 2010, 06:42 PM
With power off, you may pull off and or remove screws on side of Control assembly, check plastic ends.
Many Washers have these weird clips, youn should see 2 in the bacl, left and right side.
Remove 1, reinstall until you have can do it, then remove both and tilt body torwards the front.