PDA

View Full Version : Kenmore HE 2 plus


cjignatius
Aug 13, 2010, 01:32 PM
Why would water pour out of the kenmore HE 2 plus if it was not turned on, and the values to the machine were turned off?

chaseroo
Aug 13, 2010, 01:35 PM
Ok, listen, the front load washers are a more sophisticated type of equipment than a normal top loader. Your reason could be a couple of things

chaseroo
Aug 13, 2010, 01:37 PM
I can help you through this if you think you can diy

chaseroo
Aug 13, 2010, 01:39 PM
Rep me if you can lol. Anyway, what you need to do is to drain the washer completely, turn off the water lines, disconnect them.

chaseroo
Aug 13, 2010, 01:40 PM
Then turn the washer onto a couch or anything with an incline, DO NOT turn on side. It could **** up the machine. Look under and check every hose. I honestly would bet money on it that a hose is leaking. Draining the water.

chaseroo
Aug 13, 2010, 01:41 PM
After you do all of this and reconnect everything, let me know if I solved your problem.

chaseroo
Aug 13, 2010, 01:42 PM
GOOD LUCK BUDDY, it shouldn't be so hard :)