PDA

View Full Version : Hampton bay uc7080t remote not working


jennycmom
Aug 3, 2010, 05:50 AM
Product: Ceiling Fan
TYPE: Hampton Bay, Remote Control
Model: UC7080T

PROBLEM: The Remote stopped working. The fan is stuck on high speed.
Repairs Tried: Replaced the battery in the remote. The red light on the remote does not come on at all. Checked the connections to the receiver card inside the ceiling fan and they were all in place.

Thanks for any help on where to get replacement parts.

ceilingfanrepair
Aug 13, 2010, 06:33 PM
Does the fan have pullchains?

Ceiling fan remote controls - help and FAQ- Ceiling Fans N More (http://www.ceiling-fans-n-more.com/ceiling-fan-remote-controls.php)

jennycmom
Aug 14, 2010, 09:30 AM
No pull chains. Can only be activated via remote.

jennycmom
Aug 14, 2010, 09:30 AM
No pull chains. Can only be activated via remote.

jennycmom
Aug 14, 2010, 09:30 AM
No pull chains. Can only be activated via remote.

knight11
Dec 1, 2011, 07:07 PM
I opened ours up and cleaned off the electronics where the rubber buttons touch. It seems the rubber or whatever the material is for the button melted onto the board, making it hard for the current to signal that the button is being pressed, if you push really hard it works... until you give up from having to push the button so hard. Our controller has a problem with the top light button (the dim one). Time for another cleaning.