PDA

View Full Version : Upon installation of bulb, base of bulb burns and bulb never lights


mark_52259
Jul 9, 2010, 06:36 PM
Installed two new 3 bulb post lights on concrete entry piers, one bulb pops and burns the base immediately upon installation... I have checked the wiring and everything is wired correctly, I assume ths is a bad bulb socket and the fixture is defective, has anyone had this problem before?

Stratmando
Jul 10, 2010, 06:17 AM
Possible the metal piece is touching the outer shell, a new socket should fix. You should be able to look in the socket and see the problem.