PDA

View Full Version : How to frame a sliding door


sanadonna
Jun 27, 2010, 03:45 PM
Greetings, we are building a patio15'x30' wich will have 3 sliding doors in the design,the roof will be of a fiberglass material material that looks like old fashioned zinc sheets.

What type of framing is required for a patio this size... also I was thinking of building the deck first and ahen frame the space on top of it.

sanadonna

creahands
Jun 29, 2010, 07:10 AM
Could u give more info.

What u mean by "type of framing"?

Are u building a patio on ground?

Will it have deck over it?

These are same things need to know to help.

Chuck

sanadonna
Jul 2, 2010, 06:08 PM
Hi Chuck,
thank you for the corection that should be do I use 2x6 or 2x4 to frame my sunroom?
I am trying to build a sunroom 15'x 30' about 12"off the ground.
it will have roof.

creahands
Jul 2, 2010, 11:45 PM
Hi sanadonna

For the floor beams can u go larger then 2x6? If not, have to put a double 2x6 mid way from wall of house to end of deck. Supporting this double u will need 4 piers that go below frost line. U will also need 4 piers at end of deck.

The box beam should be double 2by. After u have poured the piers and set center double 2x6, cover ground with poly and crushed stone. Install floor beams using teco hangers.

U can frame walls with either 2x4 or 2x6, depending on the look u want. Would use 2x10 for header over doors

Chuck