I have a projection TV that you can see the picture but it looks 3D. What is the problem or is this a major issue? Can I fix it?

Im going to take a flying leap here. What you mean by looking "3D" is that the colors for it are ghosting. If that is the case then it may just need an alaignment of the tubes. Does it have a place on a menu for adjusting them? It should look like a target pattern. If not it might be best to call a tech and have them check it for you. Saves you the headache. If you seem to be missing a color then your in deeper trouble. It would mean you have a possible burned out projection tube ( at least 3 on the unit) and those can get expensive to replace.

If the colors are ghosting if the menu doesn't help can I do it by adjusting the lenses itself

Hi, antwone!

It would help those who know how to answer your question the best, if you would post the type of television that you have.

Thanks!

How do you correct the tubes if this doesn't work? Can I adjust them inside? Is this a major issue? I want to keep this TV.

How do you correct the tubes if this doesn't work? Can I adjust them inside? Is this a major issue? I want to keep this TV. The last gentleman told me I have ghosting, because it look like it in 3d.

It would be best to have a tech do it for you. They are familier with how it is suppose to be. The basics are that the colors overlay each other. That way in combination or separate they create the visual rhelm.