PDA

View Full Version : How can I load a drawing


jagkaru
Jun 13, 2010, 05:59 AM
Hi, the capacitor wires to my fan got accidentally disconnected and I need help to fix them back.

The fan has two wires (blue and brown) connected to the first and third screws of a plastic wire connector. A red wire connected to the other side (going out) of the blue (neutral) wire is going into the fan motor. A yellow wire from the fan motor is connected to the second screw of the connector. The brown phase wire is connected to the third screw of the connector. A green wire from the fan motor as well as the two wires from the capacitor are free. These three are my problem. Where do I connect them? Could someone help me please? I am enclosing my email address below so that you can any more information. I can send a simple diagram which I have drawn explaining the problem if needed.

Thanks
[email protected]

hkstroud
Jun 13, 2010, 06:27 AM
To post a picture

Upload picture to computer, convert to JPEG format.

When posting response click on "Go Advanced " button below.

Scroll down and click on "Manage Attachments"

Browse to find picture, click "Open".

Click "Upload"