PDA

View Full Version : No power to ignition module or PCM ignition fuse, any thoughts


helpimbroke
May 11, 2010, 09:37 PM
It's a 2001, Pontiac, Grand am, v-6 3.4. with the key in the on position there is no power to the ign mod, f/p inj, and pcm ing. so naturally its no start. I'm not sure of the circuit , the wire diagram is a little help, any suggestions?
Frustrated

TxGreaseMonkey
May 12, 2010, 07:08 AM
Check the ignition switch for wear, pitting, or melting.