cjsmile999
Apr 10, 2010, 01:51 PM
All right everyone this one has stumped me. About a month ago I changed out my White Rodgers 1F58-72 thermostat to a Honeywell RTH7500. I thought I had everything hooked up correctly, until I decided to turn on the A/C (previously I've been using the heat). Well it seams to only be blowing out hot air (not matter what I do), no cold air is coming out... yes I do have it set to cool :).
It's a 2 stage heat and 1 stage cool, all electric. Here is how I have it wired from old White-Rodgers to the new Honeywell.
White-Rodger (1f58-72) Honeywell RTH7500
G ---------------------------------- G
Y ---------------------------------- Y
O ---------------------------------- O/B
R ---------------------------------- R
W2 -------------------------------- W2
X1 --------------------------------- C
Thank you all,
CJ
It's a 2 stage heat and 1 stage cool, all electric. Here is how I have it wired from old White-Rodgers to the new Honeywell.
White-Rodger (1f58-72) Honeywell RTH7500
G ---------------------------------- G
Y ---------------------------------- Y
O ---------------------------------- O/B
R ---------------------------------- R
W2 -------------------------------- W2
X1 --------------------------------- C
Thank you all,
CJ