PDA

View Full Version : No hot water (at all) -- Moen Brantford Posi-Temp Single-Handle Tub/Shower Valve


kantley
Apr 1, 2010, 03:14 PM
There is no hot water. Period. When I turn on the faucet there is only cold water. If I turn the handle all the way counter-clockwise, the water flow stops completely -- not even cold water. There is hot water in every other sink/shower in the house (including the sink in the same bathroom). This particular shower faucet is not used often (thank goodness) because it is in the guest bath -- but I have a guest coming! Help, please.

CHayn
Apr 1, 2010, 03:57 PM
Pull the cartridge ( which can be tricky on a Moen positemp), turn on the water for a brief time to make sure you have water coming through the hot port (have someone help you) and then put in a new cartridge.
Let us know how it goes. Good Luck!

kantley
Apr 1, 2010, 04:18 PM
Thanks! Trying to foreshadow here... I assume I will be able to figure out how to turn on the water if I have disassembled the handle/plate. What if no water is coming through the hot port?

afaroo
Apr 1, 2010, 04:21 PM
Moen Posi-Temp cartridge
May occasionally require minor cleaning maintenance, due to debris, situations where there is water with a high mineral/sediment ontent or when
Showers are used infrequently (such as in a vacation home or guest bathroom).

Open the PDF file will show how to remove and clean the cartrdge, Good luck.

John

kantley
Apr 1, 2010, 04:34 PM
Thanks! Hopefully I can manage... :)

Peterh36
Apr 7, 2012, 09:19 AM
You need to change out the cartridge in the valve, it's a Moen Posi temp. Moen will warranty it for free. Call 1-800- Buy-Moen.

afaroo
Apr 7, 2012, 11:32 AM
Hello Peterh,

Welcome to this wonderful web site, you responded to a years old thread it may be dead by now, always check the date on the left hand upper corner, Thanks.

John